The BK Drying Recorders
BK3
The BK 3 Speed Drying Recorder has been used widely in the coatings industry throughout the world for several decades. A needle carrier holding six hemispherical ended needles travels the length of the six 305 x 25 mm test strips in 6, 12 or 24 hours. Other speeds are available to special order. A time scale on the side cover is graduated to suit the three different travel times.
BK6
BK10
The BK 6 and BK 10 Recorders have independently operating tracks allowing tests to be made at different start times. Pairs of tracks operate at the same speed, and a wide range of travel times are available. Travel times of 6, 12, 24 and 48 hours are all considered as standard. A time scale on the front cover is graduated to suit the instrument’s drying time ranges. Each pair of tracks has its own individual operating switch.
Hemispherical ended steel needles (supplied as standard).
2mm ball ended stainless steel needles.
5mm PTFE ball ended needles for specialist applications.
Teflon coated needles for specialist applications (coated one end).
5gram brass weights to increase needle load.
Paint film applicators in stainless steel with gap sizes from 10-650 microns .
Glass test strips
Casterguide for use in conjunction with the paint film applicator
*****************************************************************************
McIlwain
Tissue Chopper
**Mickle
Tissue Disintegrator**BK
Drying Recorders**Mickle
Proofer**Mickle
Rub Tester**Mickle
Dragee Pan
